Leveling Block Rubber Pads
Posted: Mon Sep 04, 2023 6:15 pm
In an effort to prevent our leveling blocks from sliding on concrete & asphalt, I cut some rubber pads to place under the blocks. Purchased a 1/2" thick horse stale rubber pad (3' x 4') at Tractor Supply. Cost approximately $35. Pad size 32" x 9" along with a 2" x 9" strip to serve as a stop. The strip is Super Glued to the pad. The rubber cuts easily with a utility knife. Created 4 pads.
The pads prevent sliding on a hard surface and sinking into the grass/soft dirt/mud/gravel. Also stops rocks from lodging into the plastic blocks. The pads are long enough so that as the vehicle progresses onto the pad, the vehicle weight holds everything in place.
The pads prevent sliding on a hard surface and sinking into the grass/soft dirt/mud/gravel. Also stops rocks from lodging into the plastic blocks. The pads are long enough so that as the vehicle progresses onto the pad, the vehicle weight holds everything in place.