Refrigerator Shelving

Roger · Post by **Roger** » Sat Sep 08, 2012 8:15 am

I was cleaning the reefer yesterday and I noticed that the paint had
chipped off some of the wire shelving especially at the ends of the wires.
Does anyone know of a good paint to touch up these areas?

Thanks, Roger

stevek · Post by **stevek** » Sat Sep 08, 2012 9:00 am

I have not used this, but is an idea. The reviews are good.
http://www.amazon.com/Rerack-Dishwasher ... im_sbs_e_5

bcope01 · Post by **bcope01** » Sat Sep 08, 2012 4:59 pm

I've had excellent results with Rustoleum products. Here ia a touch-up gloss white:

http://www.amazon.com/Rust-Oleum-215058 ... loss+white

Bill

jlef123 · Post by **jlef123** » Thu Sep 13, 2012 2:24 pm

I've used the ReRack coating on the refrigerator racks in my coach and on the racks in my home dishwasher. It has worked well. Color was a pretty close match. Did have to recoat the dishwasher rack after a few years. I purchased it at Home Depot. I call it a coating as it is very thick, unlike a paint.

mockturtle · Post by **mockturtle** » Thu Sep 13, 2012 2:29 pm

bcope01 wrote:I've had excellent results with Rustoleum products. Here ia a touch-up gloss white:

http://www.amazon.com/Rust-Oleum-215058 ... loss+white

Bill

Yep, I painted my sewer hose holder [PVC pipe] on the bumper with it and it turned out fine. The paint is holding up well, too.

jeleuen · Post by **jeleuen** » Fri Sep 21, 2012 9:35 pm

My wire shelves had too many rust spots to repaint. Ordered all new wire shelves at local RV dealer. Cost about $120 for all shelves, think there were six. Outcome is that fridge looks like new.